|
|
Post by Beemer on Jul 20, 2020 7:04:24 GMT 1
2-EMBR Phenom 300 due @ 15:00hrs.
|
|
|
|
Post by hazard on Jul 20, 2020 8:50:00 GMT 1
Hawk T2 ZK019 approx 08:45 for a Low Approach/Go Around.
Also looks like Hawk T2 ZK029 is inbound for the same 08:51 over Runcorn
|
|
|
|
Post by ilt on Jul 20, 2020 8:59:10 GMT 1
Hawk T2 ZK019 approx 08:45 for a Low Approach/Go Around. Also looks like Hawk T2 ZK029 is inbound for the same 08:51 over Runcorn First was VYT28, "VICTOR28" and second VYT24, "VICTOR24" |
|
|
|
Post by bulldog on Jul 20, 2020 11:47:08 GMT 1
Is this the first day that EasyJet are starting to resume non UK flights?
|
|
|
|
Post by 8miles27 on Jul 20, 2020 12:29:53 GMT 1
It is yes at LJLA.
|
|
pauljs
Junior Member
Posts: 53
|
Post by pauljs on Jul 20, 2020 12:53:56 GMT 1
Chinnook just passed Runcorn for EGGP
|
|
|
|
Post by andyh on Jul 20, 2020 13:35:12 GMT 1
And again at 13:30, though unsure if this was the same machine as earlier or not?
|
|
|
|
Post by kevmul on Jul 20, 2020 13:35:49 GMT 1
Either a second pass for the same Chinook, or a second aircraft.
There's no callsign on Freedar, unfortunately.
Kev
|
|
|
|
Post by raymondo on Jul 20, 2020 13:39:22 GMT 1
Chinook is using call sign LIF1 and is seriously miscoded [CAFEAB]. There is an exercise with the Royal Navy and RAF all week in the Altcar area.
Expect Chinooks, Merlins and Wildcats through the zone.
|
|
|
|
Post by ilt on Jul 20, 2020 13:59:24 GMT 1
The first aircraft was LIFTER02 and the mode-s 'callsign' field had "LIFT02" entered in it
The second aircraft was LIFTER01 and mode-s 'callsign' field had "Lif01"
Both cabs were using the same 24 bit address, 0xCAFAEB. Neither cab was transmitting public position information, neither was 'miscoded'.
|
|
|
|
Post by Beemer on Jul 20, 2020 14:45:34 GMT 1
Lifter 01 on approach for r/w 27 @ 13:30hrs was ZK550.
|
|
|
|
Post by raymondo on Jul 20, 2020 14:47:15 GMT 1
The first aircraft was LIFTER02 and the mode-s 'callsign' field had "LIFT02" entered in it The second aircraft was LIFTER01 and mode-s 'callsign' field had "Lif01" Both cabs were using the same 24 bit address, 0xCAFAEB. Neither cab was transmitting public position information, neither was 'miscoded'. The hex codes for the Chinooks begin with 43C so therefore they are miscoded. |
|
|
|
Post by raymondo on Jul 20, 2020 14:57:39 GMT 1
There is one Merlin over Altcar using its correct code [43C073] which equates to ZJ124
|
|
|
|
Post by Beemer on Jul 20, 2020 14:58:28 GMT 1
ZK036/FL Hawk T.2 VYT24 ILS + g/a 27 @ 14:58hrs.
|
|
|
|
Post by raymondo on Jul 20, 2020 15:29:13 GMT 1
Lifter 01 on approach for r/w 27 @ 13:30hrs was ZK550. |
|
